Description (2) New 8250-968 Woodward governors. First unit is part no. 8250-968, serial no. 12100437, customer no. 161-0788 ECL 00. Second unit is part no. 8250-968, serial no. 12100438, customer no. 161-0788 ECL 00.
Price is per unit.
Please call for more details.
Description Caterpillar 3508B Industrial Engine. 930kw, 1301hp, 50hz, 1500rpm. Year 2007, 0 hours since new. New Surplus. Arrangement# 1473165. (Engine had minor damage during transit, has been repaired and dyno tested).
Please inquire on conversion to 1800rpm, 60hz.
See attached sheets for more info.
Description (3) Three New CAT G3616 Natural Gas Gensets. 4732hp at 1000rpm. Year 2008, 0 hours since new. Engine Ar# 1763616. Kato generator end rated at 3425Kw, 6600v, 50hz, 1000rpm. (ends not coupled to engines at this time).
Please contact us for details.
Description (2 available) Caterpillar 3516C Marine Propulsion Engines. Rated 2100hp @ 1600 rpm. Tier 2. B-rating. All standard rotation. air starting motor, keel cooled. ABS and IMO certified.
Price per unit in USD.
Please call for more details.
Description SEVERAL NEW CATERPILLAR 3516C HD MARINE ENGINES. 2448HP @ 1600RPM. 0 HOURS SINCE NEW. TIER II. AIR STARTING MOTOR, KEEL COOLED, EXPLOSION RELIEF VALVE, MARINE CONTINUOUS A RATING, MARINE PROPULSION ENGINE, STANDARD ROTATION, MARINE POWER DISPLAY, ABS ENGINE CERTIFICATION. CAT FACTORY WARRANTY INCLUDED. UNITS ARE IN STOCK READY TO SHIP.
PLEASE CALL FOR MORE DETAILS.
Description Caterpillar 3612 Generator Set. Removed when running. Being sold as rebuild able cores with approximately 60K hours total. Rated at 3266kw, 4083kva, 50hz, 6300v, 1000rpm. Contains Caterpillar Generator End. Unit is Open Skid Mounted.
Unit is being sold as is, where is.
Please call for more details.
Description (6) New Caterpillar 3406 Industrial Engines. Rated 363HP @ 1800RPM. 0 Hours since new. Tier 2 Emissions. Engines made 657 Scrapers. Arrangement # 249-9188
Price per unit.
Please call for more details.
Description CATERPILLAR G3406 NATURAL GAS ENGINE. 276HP @ 1500RPM. YEAR 1999. 4400 HOURS SINCE NEW.
CONVERTIBLE FROM 1500RPM TO 1800RPM.
PLEASE CALL FOR MORE DETAILS.
Description (2) New Surplus Caterpillar 3512B HD DITA Marine Propulsion Engines. Rated at 1675 hp, 1600 rpm, "A" rating. Year 2008, zero hours since new. Complete with explosion relief valve, heat exchanger cooled, ABS certification, IMO Tier 1, standard rotation, STD operating speed. Engine Arrangement #: 2322505.
Price is per unit.
Please call for more details.
Price is per unit:
Please call for more details.
( Unit also available for rent )
KW910 HPNA
RPM1800 HZ60
Volt480 Hours3340 Since New
Tipo de CombustibleDiesel PortátilYes
Description CATERPILLAR XQ1000 INDUSTRIAL GENERATOR SET. 910KW PRIME, 60HZ, 3340 HOURS SINCE NEW. 3508B ENGINE WITH FULL UTILITY GRADE SWITCHGEAR, SOUND ATTENUATED 40 FT TRAILER WITH CHASSIS.
PLEASE CALL FOR MORE DETAILS.
Description General Electric 5ATI830965A3 Generator End. Rated at 850kw/1062kva, 60hz, 600v, 1200rpm, 3 phase, Frame 8309, 0.8PF. Unit complete with Two Bearing and Caterpillar Coupling.
Please call for more information
Description Caterpillar 3606DI Marine Engine. Rated at 1300 kw, 1743 hp, 750 rpm. Year 1998. Complete with Caterpillar Governor, part no. 4P6592, Twin Inlet Turbo and Crank Shaft. Arrangement# 9Y8422.
Please call for more details.
Description New Caterpillar G3508 LE Natural Gas Engines. 630/670hp at 1200/1400rpm. Year 2006, 0 hours since new. Arrangement# 273-3072. Front stub shaft, shrink warp, 8:1 compression ratio, low emission level.
Units sold as is/where is.
CAT warranty available at an additional cost.
Please call for more details.
Description CATERPILLAR 3512B MARINE ENGINE. RATED AT: 1500HP AT 1600RPM, 0 HOUR REBUILT.
WARRANTY ON MAJOR PARTS ONLY, COMPLETE REBUILT WITH ORIGINAL CATERPILLAR PARTS,
STANDARD BLOCK AND CRANKSHAFT
SEE ATTACHED BUILD SHEET FOR MORE INFO.
PLEASE CALL FOR MORE DETAILS.
Description NEW RADIATORS FOR (CATERPILLAR 3512 OR SIMILAR ENGINES) 55' VERTICAL REMOTE RADIATOR. 1500HP RATED, 55' SQUARE FOOT SIZE. COPPER-BRASS RADIATOR AND AFTER COOLER, STEEL TANKS AND SIDE STRUCTURE, COOLING, FAN SUPPORT STRUCTURE, FAN MOTOR WITH NECESSARY BELTS AND PULLEYS, FAN DRIVE MOTOR, FAN GUARD, AND CORE GUARD. (3-4 WEEK LEAD TIME)
PLEASE CALL FOR MORE DETAILS.